converting image for carving

NEJE iOS, ipadOS, macOS APP
Post Reply
Klaasdebaas
Posts: 1
Joined: Tue Oct 05, 2021 12:04 pm

converting image for carving

Post by Klaasdebaas »

Hello,

since 3 years I've got an NEJE Master laser carving machine, first I've used it very much with my windows pc.
For editing my files I've used the Inkscape program with the extensions to produce an gcode file.
since the windows pc crashed I've bought an Macbook.
Now I can't find the right extension to convert my images to the right gcode file for engraving.
The only thing I'd need to engrave right now is my company logo in all of my working tools.
Is here somebody wo would like to convert my JPG or vector to an gcode extension wich I can use?

thanks in advance,

Klaas
dav
Site Admin
Posts: 113
Joined: Sat Nov 21, 2020 4:00 am

Re: converting image for carving

Post by dav »

Inkscape currently does not support converting vector cutting files. What you bought is the earliest master 2. Please pay attention to whether it supports two firmwares. GRBL firmware can support laserGRBL or lightburn software. If not, you may need to update the following The latest control board, NEJE provides the latest accessory support;
User avatar
ManuelaOrtiz
Posts: 1
Joined: Mon Oct 11, 2021 9:44 am

Re: converting image for carving

Post by ManuelaOrtiz »

Hi, yes I had that problem too and I had to upgrade the control board, it took a while, but now everything is great!!!
Post Reply