2s Plus 40Watt

lightburn for NEJE machine
Post Reply
Sputnik3
Posts: 3
Joined: Tue Aug 17, 2021 7:22 am

2s Plus 40Watt

Post by Sputnik3 »

Hello, I bought the software but I can't get the Neje 2s Plus 40 Watt set up. The laser is not automatically recognized. I made the following setting manually. Based on GRBL 1.1f. Area setting: X: 255mm, Y: 420mm. Origin X0, Y0: Front Left. Automatic reset of limit switch. The problem is I can drive the laser manually to a point but when I start an order the laser moves to a completely wrong position. For example I draw a square in the middle of the work surface but the laser wants to start outside of its work surface. Please help me. Many Thanks
dav
Site Admin
Posts: 113
Joined: Sat Nov 21, 2020 4:00 am

Re: 2s Plus 40Watt

Post by dav »

Origin X0,Y0: Front Left.
JackWong
Posts: 22
Joined: Thu Jun 17, 2021 2:17 am

Re: 2s Plus 40Watt

Post by JackWong »

Sputnik3
Posts: 3
Joined: Tue Aug 17, 2021 7:22 am

Re: 2s Plus 40Watt

Post by Sputnik3 »

Many thanks for the answer. For my understanding. After homing, I have to "manually" go back to Y0 X0 and then start the job? Right? thanks
dav
Site Admin
Posts: 113
Joined: Sat Nov 21, 2020 4:00 am

Re: 2s Plus 40Watt

Post by dav »

You do not need to manually, it is automatically reset.
Sputnik3
Posts: 3
Joined: Tue Aug 17, 2021 7:22 am

Re: 2s Plus 40Watt

Post by Sputnik3 »

thx
Post Reply