NEJE KZ 3000 verify failed

NEJE Win software
Post Reply
sany2221
Posts: 1
Joined: Sun Oct 24, 2021 11:05 am

NEJE KZ 3000 verify failed

Post by sany2221 »

hi, i have a problem. I can't connect the laser to the computer. lists me Verify failed. how to proceed to fix the error.
Thank you for all the advice.
Attachments
20211024_125047.jpg
20211024_125047.jpg (238.24 KiB) Viewed 244 times
dav
Site Admin
Posts: 148
Joined: Sat Nov 21, 2020 4:00 am

Re: NEJE KZ 3000 verify failed

Post by dav »

Please ensure 2 conditions: 1. Whether the drive is installed successfully; 2. Whether the USB interface is working properly and plugged firmly; NEJE software is designed to automatically find the port and automatically connect, if the above still cannot be solved, you can try to replace a computer or USB printing If you still can’t solve it, please contact the customer service you purchased, and the customer service will be happy to solve the problem for you; NEJE USB cable has passed the current and communication tests at the NEJE factory. Under normal circumstances, there will be no problems, it is very likely It is the driver or usb interface contact problem;
kroky
Posts: 2
Joined: Tue Nov 02, 2021 11:14 pm

Re: NEJE KZ 3000 verify failed

Post by kroky »

I have exactly the same problem. Neje master 2S, PC - WIN XP, 32 bit, software Neje_V4.2_EN. On a computer with WIN7, the program Neje_V5.6.4 works.
Is there a problem with WIN XP? Which version of Neje would work on 32bit WIN XP?
Last edited by kroky on Thu Nov 04, 2021 10:09 pm, edited 1 time in total.
dav
Site Admin
Posts: 148
Joined: Sat Nov 21, 2020 4:00 am

Re: NEJE KZ 3000 verify failed

Post by dav »

The 2s version is a 32-bit processor. This control system integrates 2 control modes; including NEJE mode and GRBL mode;
Post Reply